UPCOMING EVENTS
LITERATURE REQUEST

Receive up-to-date news, features, research, analysis and case studies from Waldmann Lighting.

Yes! I would like to receive literature from Waldmann Lighting.

LED

MACH LED

The Mach LED was designed to light up the area inside a machine while taking a minimum amount of space. The easy installation and 50,000 hours of maintenance-free operation ensure maintenance-free performance – a time saver for the operators and the job. The solid construction of the strong anodized aluminum housing and hardened protective glass keep this light impervious to chemicals, flying debris and machine vibration. Available in four standard lengths.

ONE LED
 

ONE LED was developed for the purpose of providing maximum light with a minimal, no-frills housing. Designed as an all-purpose, waterproof LED area light, it can be used in the most confined spaces while providing maximum LED light output using the latest LED chip-array technology. ONE LED can operate in ambient temperatures of up to 120 F º (50 C º) and is resistant to shock, vibration and continuous impact common in production and manufacturing environments.

SLIM LED
The Slim LED was designed for machine and equipment use where light is needed but space is limited. Optimum light is ensured using the latest LED technology – liner-light Power Flex, in which the LEDs are directly attached to a flexible circuit board. The mechanizations of this design make it impervious to vibration and impact that may be a factor in some machining conditions. With a protective rating of IP67, the Slim LED is completely waterproof. However, it is not recommended for situations where coolants or lubricants are present.

HEAD LED
The HEAD LED has purposely been reduced to essential features, using minimal design for maximum performance. As a result, the HEAD LED can be easily integrated into machines and equipment - even when space is tight. Combining LED technology and specially designed Waldmann optics, this flood light provides a major light source with minor space requirements. The HEAD LED measures just under 1-inch in height and less than 2-inches in diameter. there is no space too small for the HEAD LED. This small luminaire can light up an entire machine with its 70- or 100-degree flood. It is also impact and vibration resistant, so ideal for any machining location.

 

MACH LED PRO
MACH LED PRO provides maximum LED light output using the latest LED chip-array technology, eliminating shadows and distortion of the area being illuminated. Suitable for both wet and dry locations, the MACH LED PRO delivers maximum luminous power with minimal space intrusion. It can be mounted either flush or surface-mounted inside the machine housing.       

RING LED
The RING LED is the lighting solution for the precise examination of parts for a number of fields of application – from mechanical engineering to research and development. This workhorse of a light is all business. The sleek design is minimal and fits easily into any workspace. The luminaire head is less that ½” thick and a mere 5” in diameter. The specially coated, distortion-free Eschenbach magnifier lens reaches 2.8” in diameter and offers 5.3 distortion-free diopters. Using six innovative LEDs provides critical added value compared to conventional fluorescents: four times more light per watt, considerably lowering energy consumption. These LEDs offer a minimum of 50,000 hours of operating life at 100% brightness level – maintenance free for over six years running 24/7!


FLAT LED
The FLAT LED is designed for wide area illumination using state-of -the art, high output LEDs with specially designed optics to produce intense, wide area illumination in confined spaces. With an overall depth of only 7/8", the FLAT LED can be installed in a variety of applications and is completely waterproof (IP69K) and maintenance-free.

SPOT LED 003
The SPOT LED 003 can be flexibly used as either a spot or area light. - LUXEON® K2 LED lamps are used and guarantee constantly high quality of illumination - service life up to 50,000 hours or around 6 years of continous operation - impervious to shock & vibration - high color temperature of the LEDs promotes concentration and precision.

ABL Single LED
The ABL Single LED is designed for tight spot lighting in small or confined areas. A single high performance, high output LED provides pinpoint accuracy and flexible positioning. Available with gooseneck arm, pivoting head or with detachable head for hand held use, the ABLL single LED is perfect for illuminating control panels, drill applications, bench and workstation inspection, vision system applications, CNC machine installations.

Lumatris
The Lumatris is designed with the new technology of LEDs, combine the high LED light output now available with specially designed optics to accentuate accessible light without glare or heat. Optimum light control is within reach. The Lumatris is constructed of strong, anodized aluminum and 4mm thick safety glass, 50,000 hours of maintenance-free operation equals evergy and cost savings. Additionally, the eco-mode option allows for even 30% less energy consumption. That, along with the characteristics of LED industrial fixtures makes the Lumatris an ideal choice for even the most volatile machining environments.